How to use PhilRice flatbed dryer

in Keycheck8 Harvest Management

Palaycheck - Harvest Management

1. Check the temperature of drying air, air static pressure at the plenum, and grain depth when operating dryer.
2. When drying palay for seed purposes, the temperature should not exceed 43℃ for commercial purposes (milled rice), a higher temperature of up to 52℃ can be used.
3. When drying dripping wet palay or those with relatively high moisture contents, operate the dryer with unheated air during the first 1-2 hours of drying.
4. Maintain the depth of seeds in the drying bin at 1 foot deep uniformly. Avoid stepping directly on the grain to avoid compaction of seeds on some portions of the drying bin.

This will affect the uniformity of air flow passing through the grain mass.

5 To check if the blower is supplying the right volume of air per unit time (or if the desired static pressure at the plenum is attained), place a whole sheet of bond paper on top of the grain- filled drying bin.

The paper should float (approximately 0.5-1 centimeter from the surface of the grain mass)
when placed anywhere on top of the drying bin under normal operating conditions.

 

Download How to use PhilRice flatbed dryer

Are you satisfied with the material?
  • Yes (74)
  • No (21)

19
Leave a Reply

avatar
7 Comment threads
12 Thread replies
1 Followers
 
Most reacted comment
Hottest comment thread
11 Comment authors
Pinoy RiceJohnPinoy RiceJaniceMichelleR Recent comment authors
  Subscribe  
Notify of
Janice
Guest
Janice

Hi!

Tanong ko lang po kung meron po ba kayo demo sample ng flatbed dryer? Kung meron po saang location sa Pinas ang demo sample nyo at meron po ba sa Negros area? paano po maka visit may kailangan pa po bang kuhanin like permits bago pumunta or need po bang mag set ng appointment before visiting? I’d like to know po so i can prepare for the visit.
Hopefully you could address my query as soon as possible po’

Thanks!

Pinoy Rice
Admin
Pinoy Rice

Hello Janice, ang flatbet dryer po ay ipinamahagi ng Department of Agriculture sa mga Farmers’ Association at Irrigators’ Association. Kung gusto niyo pong makakita ng flatbet dryer ay makipag-ugnayan po kayo sa pinakamalapit na DA office sa inyong lugar. Para sa karagdagang impormasyon magtext sa PhilRice Text Center: 0917 111 7423.

John
Guest
John

do you have a design calculation on this? can you share it to me?

Pinoy Rice
Guest
Pinoy Rice

Hi John, for your queries regarding flatbed dryer, you can contact our aming Rice Engineering and Mechanization Division at nos. (044) 456 0277 local 650-652; or contact si Engr. Phoebe Castillo: pbcastillo87@gmail.com | 0997-502-8200.

MichelleR
Guest
MichelleR

Hi, was wondering if “Rice Engineering and Mechanization Division” has an email address. I might not be able to call the lines provided.

Pinoy Rice
Admin
Pinoy Rice

Hello MichelleR, wala pong email address ang Rice Engineering and Mechanization Division. Maaari niyo pong imessage ang aming facebook page, https://www.facebook.com/rice.matters/ upang mai-private message po namin kung sino ang maaari niyong macontact sa REMD.

Romeo
Guest
Romeo

Hello po. I can build a reversible flat bed dryer myself but would like to have assistance with specs of the semi-automatic RAM drive down draft furnace with the rotatable pipes as grates. Could you advise how can I proceed please. Would you have info whether customised high temp ceramic grates could be feasible? Salamat po.

Pinoy Rice
Admin
Pinoy Rice

Hello Romeo, for the request of assistance regarding flatbed dryer, you may contact our Rice Engineering and Mechanization Division at (044) 456 0277 local 650-652.

Ronna
Guest
Ronna

Good afternoon po, paano po maka hingi ng quotation for that flat bed dryer?

Pinoy Rice
Admin
Pinoy Rice

Hello Ronna, maaari po kayong magsend ng request ng quotation sa prri.mail@philrice.gov.ph.

julian
Guest
julian

Hello everyone, I am a professional designer fabricator. I design and fabricate customize equipment for a living. Me and/or my team can design just about anything base on your need and budget. 09474774683 geronajulian4@gmail.com

Pinoy Rice
Admin
Pinoy Rice

Hello Julian, if you want to collaborate with us, please send a project proposal to prri.mail@philrice.gov.ph. Thank you.

julian
Guest
julian

Thanks, Sent you an email.

OGIE GALAPATE
Guest
OGIE GALAPATE

Where can I see the actual machine? Or better still, can you email me the detailed plans in construction of the flatbed dryer? Thanks.

felipe fontanilla
Guest
felipe fontanilla

How the construction of rice seed dryer

Pinoy Rice
Admin
Pinoy Rice

Hello sir Felipe, there is a detailed plans in construction of flat bed dryers, for assistance you may contact our Rice Engineering and Mechanization Division at (044) 456 0277 local 650-652

ghani baldomero
Guest
ghani baldomero

how about the reversible flatbed dryer
how can I avail this dryer?

Pinoy Rice
Admin
Pinoy Rice

Hello Ghani, for information and purchase of reversible airflow flat bed dryer, you may contact our rice engineering and mechanization division at (044) 456 0277 local 650-652 or contact their staff at 0997 5028500.

Previous post:

Next post: